NEC 2000 Series User Manual page 42

Nec user's guide monitor powermate 2000 series
Table of Contents

Advertisement

Menu Item
Type
Cylinders
Heads
Sectors
Maximum Capacity
Total Sectors
Maximum Capacity
Main Menu Items
Settings (default is bold)
User, Auto, None, CD-ROM, IDE/ATAPI
Removable
When set to Auto, the values for Cylinders,
Heads, Sectors, Total Sectors, and Maximum
Capacity are displayed but are read only.
When set to Auto, the BIOS detects what the
drive is capable of, not the translation
mechanism that was used to format the drive.
If a drive is run in a mode other than the
mode in which it was partitioned and
formatted, unpredictable results might occur,
including data loss.
When set to None, informs the system to
ignore this drive.
When set to CD-ROM or IDE/ATAPI
Removable, allows the manual entry of all
fields described next.
When set to User, allows the manual entry of
all fields described next.
CHS Format (label field only)
When Type is Auto, value in the Cylinders
field is auto-detected and field is read only.
When Type is Auto, value in Heads field is
auto-detected and field is read only.
When Type is Auto, value in Sectors field is
auto-detected and field is read only.
6007 MB
LBA Format (label field only)
11733120 total sectors
6007 MB
Configuring the System 3-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermate 2000 - 05-2000Powermate 2000 series

Table of Contents