NEC 2000 Series User Manual page 52

Menu Item
Security Mode
Password on Boot
Fixed Disk Boot Sector
Diskette Access
Security Menu Items
Settings (default is bold)
Press Enter to access the Security Mode.
Use this mode to select Password (default),
SmartCard, or FingerPrint. Press Enter to
open the selected field.
Use the SmartCard field to assign access to
the SmartCard Reader by the supervisor
and/or user. Press Enter to bring up the
SmartCard Reader dialog box for setting up
SmartCard security.
The Assign Supervisor SmartCard field
controls Supervisor access to the BIOS
Setup utility and the system. A PIN number
controls access.
The Assign User SmartCard field controls
user access to the system at boot. A PIN
number controls access.
Disabled, Enabled
When Enabled, requires password entry
before boot. System remains in secure
mode until password is entered.
Normal, Write Protect
Write Protect protects the boot sector on the
hard disk from viruses.
Supervisor, User
Controls access to the diskette drive.
Configuring the System 3-19