Installing the rear wheel
3
4
7
CAUTION
Do not damage brake disc and linings
during installation! Have a SFM dealer
check the tightening torques.
- Clean and grease the full fl oating axle
(4).
- Introduce full fl oating axle (4), chain
adjuster (7), brake support (8) with brake
caliper (6) into rear suspension.
5
NOTE
Insert brake support into the guide (9) of
rear suspension.
- Install the drive chain (5).
- Install rear wheel with spacer bush (3)
and full fl oating axle (4).
NOTES ON MAINTENANCE
6
8
9
2
1
- Insert right chain adjuster (2) and
reassemble with axle nut (1).
- Adjust the drive chain (5).
(see adjusting drive chain).
- Tighten axle nut (1).
Torque
Axle nut (1):
50-60 Nm
45