Lay-Up / Commission - Sachs Bikes MadAss 50 Owner's Manual

SERVICE INSTRUCTIONS

Lay-up / commission

Lay-up
- Clean the motorcycle.
- Remove the battery.
Observe the maintenance in struc tions.
- Spray suitable lubricants onto the brake-
lever and clutch-lever joints and the side-
standard and main-stan dard bearings.
- Rub bright / chromium-plated parts with
acid-free grease (Vaseline).
- Store the motorcycle in a dry room and
jack it up so that its weight is not on the
wheels.
38
NOTE
Before laying up the motorcycle, have a
SFM dealer change the engine oil.
Combine lay-up / com mis sion activities with
an inspection by a SFM dealer.
Commission
- Remove the preservation agents from the
outside.
- Clean the motorcycle.
- Install the charged battery.
- Preserve the battery terminals with ter-
minal grease.
- Check / adjust the tyre pressure.
- Check the brakes.
- Carry out activities according to the in-
spection plan.
- Carry out the safety checks.