Tyre Profi Le, Tyre Pressure And Size - Sachs Bikes MadAss 50 Owner's Manual

SAFETY TEST
Tyre profi le
1
Checking the tyre profi les
WARNING
Observe the minimum profile depth
prescribed by law.
Never ride without valve caps (2). Firmly
tightened valve caps prevent the tyre
from sud den ly losing pres sure.
- Measure the profi le depth at the cen tre
(1) of the tyre's tread.
Recommended minimum profile depth:
Front 2.0 mm
Rear 2.5 mm
22
Tyre pressure
Checking the tyre pressure
WARNING
Adjust the tyre pressure according to
the total weight load. Never exceed the
rated total weight or the bearing capacity
2
of the tyres.
Incorrect tyre pressure will have a con-
siderable effect on the riding prop er ties
of the motorbike and the lifespan of the
tyres.
- While the tyres are cold:
- Twist off the valve caps.
- Check/adjust the tyre pressure.
- Twist on the valve caps.
Tyre pressure Solo
Front 2.2 bar
Rear 2,5 bar
Tyre size
The standard motorbike is provided with the
following tyre sizes:
Front 90/80-16 M/C 45P
Rear 120/70-16 M/C 57P
All tyres are tubeless.
WARNING
Use only tyres approved by the man u -
fac tur er. The use of non-approved tyre
brands, types or sizes leads to the op-
erating permit of the vehicle be com ing
null and void. Use only pairs of tyres
pro duced by the same man u fac tur er.
With
passenger
2.2 bar
2.7 bar