Removing The Rear Wheel - Sachs Bikes MadAss 50 Owner's Manual

NOTES ON MAINTENANCE

Removing the rear wheel

2
1
CAUTION
Do not damage brake disc and linings
during removal!
Protect the wheel bearings from dirt and
moisture!
44
3
4
2
- Prop up the motorbike so that the rear
wheel can turn freely and that the
motorbike is secure.
- Hold the full fl oating axle (4) and release
the axle nut (1).
- Unscrew the lock nuts (2) on the left and
right-hand sides of the chain adjuster all
the way.
- Remove the drive chain (5).
5
NOTE
When taking off the rear wheel, make sure
that the bush (3) to the left of the wheel
hub is not lost.
- Raise the rear wheel, remove the full
fl oating axle (4) with brake support (6)
and brake caliper and take off the rear
wheel to the back.
6
8