Table of Contents
Advertisement
Play/Pause /5 ►||
USB port
Network
abnormal
indicator light
HDD
abnormal
indicator light
Record light
2.1.10 NVR48/48-16P/78/78-16P Series
The Front panel is shown as follows. See Figure 2-12.
Please refer to the following sheet for front panel button information.
Name
Power button
Number button
Input
number
more than 10
Shift
Up/
Down
In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
In text mode, input number 5(English character J/K/L).
To connect USB storage device, USB mouse.
Network error occurs or there is no network connection, the
Net
light becomes red to alert you.
HDD error occurs or HDD capacity is below specified
HDD
threshold value, the light becomes red to alert you.
System is recording or not. It becomes on when system is
1-16
recording.
Icon
Function
Power button, press this button for three seconds to boot up or
shut down NVR.
Input Arabic number
0-9
Switch channel
If you want to input a number more than 10, please click this
-/--
button and then input.
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Enable or disable tour.
Activate current control, modify setup, and then move up and
down.
、
Increase/decrease numeral.
Assistant function such as PTZ menu.
Figure 2-12
69
Advertisement
Table of Contents
