Nvr42/42-P/42-8P/72/72-8P Series - Dahua DHI-NVR5208-8P-4KS2 User Manual

2
3
4

2.1.5 NVR42/42-P/42-8P/72/72-8P Series

The front panel is shown as below. See Figure 2-5.
Please refer to the following sheet for front panel button information.
Name
Power button
Shift
Up/1
Down/4
Left/2
Right/3
ESC
Enter
Record
Power indicator light
HDD status indictor light
USB
Icon Function
Power button, press this button for three seconds to boot up
or shut down NVR.
In textbox, click this button to switch between numeral,
Shift
English(Small/Capitalized),donation and etc.
Activate current control, modify setup, and then move up and
down.
、
Increase/decrease numeral.
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)
Shift current activated control,
When playback, click these buttons to control playback bar.
 
In text mode, input number 2(English character A/B/C)
/3(English character D/E/F)
.
Go to previous menu, or cancel current operation.
ESC
When playback, click it to restore real-time monitor mode.
Confirm current operation
ENTER Go to default button
Go to menu
Manually stop/start recording, working with direction keys
REC
or numeral keys to select the recording channel.
The red light becomes on when the power
connection is OK.
The red light becomes on when HDD is abnormal.
USB port
Figure 2-5
51