About The Manual Setup Of Print Density Adjustment - Oki C5500 Maintenance Manual

2. Explanation
PX734/735 are ROMs used in common for domestic and overseas markets.
This setting is stored on the EEPROM of the SP1/TBH PCB.
When the version number of the program ROM is changed, the setting will be reset to the
default value.
Make this setup when there is no destination set up or the version number of the program has
been changed.
5.5

About the manual setup of Print density adjustment

The printer is shipped out of the factory with its automatic density correction mode set to "Auto".
However, if that mode is changed to "Manual" by the user, the density setting may be displaced
with the use along the time. Execute this manual setup when the density appears below par.
Note! Make the setup when the printer remains at a standstill. Do not conduct it during warming-
up.
(1) Press the MENU+ or MENU- key several times, and when [COLOR MENU] is
displayed, press the ENTER key.
(2) Press the MENU+ or MENU- key to cause [DENSITY ADJUSTMENT/ RESET] to be
displayed.
(3) Press the ENTER key.
Automatic Print density adjustment will start.
43085101TH Rev.1
Oki Data CONFIDENTIAL
154 /