Oki C5500 Maintenance Manual page 126

Notes!
PAGE setup ----------------- After shifting the digit of the set value with the MENU+ key or MENU-
COLOR setup --------------- Pressing the ENTER key after selecting ON causes the data indicated
Print setup for each color --- Pressing the MENU+ key or MENU- key activates shifting. Pressing
COLOR
ON
4. When the ENTER key is depressed while "PRINT EXECUTE" remains displayed in the lower
line of the display section in the operation of Item 2., the test print takes place with the set
values specified in Items 2 and 3.
Pressing the CANCEL key stops the test print.
If any of the alarms indicated in the Detail column of the table below is detected when test print
is started or during execution, it will be indicated on the panel, and the test print will be interrupted.
(For details on the errors, see Subsection 5.3.2.14 Details of panel indications. In the case of
a PU test print, the comments displayed will be different.)
Print Patterns (Cannot be used for checking print quality.)
Patterns 0 and 8 to 15 ... Blank sheet print
43085101TH Rev.1
key, press the ONLINE key. The set value will be incremented. Pressing
the CANCEL key decrements it.
below to appear on the panel.
the ONLINE key or CANCEL key switches between ON and OFF.
Pressing the BACK key restores the original panel indications.
Panel Display
PAPER END
SELECTED TRAY
DUPLEX UNIT IS
NOT INSTALLED
SELECTED TRAY IS
NOT INSTALLED
REMOVE PAPER
OUT OF DUPLEX
Pattern 1
Y:ON M:ON
→
C:ON K:ON
Detail
The tray is out of paper.
A duplex unit is not
installed.
The selected tray is not
installed.
An internal error of the
duplex unit occurred.
Pattern 2
Oki Data CONFIDENTIAL
126 /