Oki C5500 Maintenance Manual page 142

LCD (English)
(I I
means no display in upper line)
I I
%COLOR% TONER REGIONAL
MISMATCH
I I
NON GENUINE %COLOR% TONER
I I
PS3 EMUL ERROR
I I
ORDER %COLOR% IMAGE DRUM
I I
ORDER FUSER
I I
ORDER BELT
I I
FUSER LIFE
43085101TH Rev.1
Ready
Attention
LED LED
Varies On The Region ID of toner cartridge is not proper to the
distribution channel.
%COLOR%
Y
M
C
K
Varies On The chip of RFID is not compatible.
%COLOR%
Y
M
C
K
Blink Varies Interpreter detects an error due to the following reason.
Receive data after this is ignored until the job
completion. When the job is completely received, this is
automatically cleared.
- The job has a grammatical error.
- The page is complicated, and VM was used up.
(C6100/)
Varies On The life of the drum (warning). Displayed in a
(Off) combination of other message in the first line. The
printer stops at the point when it reaches the drum life
(Shifts to error, OFF-LINE.)
Moreover, when set as "NearLifeLED = Disable",
Attention LED is switched off.
Y
M
C
K
Varies On Notifies the fuser unit is near its life.
(Off) Moreover, when set as "NearLifeLED = Disable",
Attention LED is switched off.
Varies On Notifies the belt unit is near its life. This is a warning;
(Off) thus, printing will not stop.
Moreover, when set as "NearLifeLED = Disable",
Attention LED is switched off.
Varies On Notifies the life of the fuser unit (warning). Displayed in a
combination of other message in the first line. Warning
only (No Life error).
This appears when the cover was opened and closed
just after the fuser life error occurred.
Also this occurred instead of the fuser life error, if the
"FUSER LIFE PRINT CONTINUE" setting was 'ON'.
Oki Data CONFIDENTIAL
Description Level
Warning
Warning
Warning
Warning
Warning
Warning
Warning
142 /