Oki C5500 Maintenance Manual page 147

LCD (English)
(I I
means no display in upper line)
I I
PU FLASH ERROR
PRESS ONLINE SW
INVALID SECURE DATA
PRESS ONLINE SW
INVALID DATA
PRESS ONLINE SW
INVALID DATA OR TIMEOUT
LOAD %MEDIA_SIZE% IN MP TRAY
AND PRESS ONLINE SWITCH
43085101TH Rev.1
Ready
Attention
LED LED
Varies Varies PU flush error (Error occurs during the alteration of PU
farm or it failed in the alteration in PU flush of such as
LED Head information.)
*** is below;
PU
PU SUB-CPU
TRAY2
DUPLEX
Varies Varies Indicates that a job has been deleted because corruption
of data has been detected by the integrity verification in
authentication printing. (C6100)
Varies Varies Invalid data was received. Press the On-line switch and
eliminate the warning. Displayed when unsupported PDL
command is received or a spool command is received
without HDD.
(C6100)
Varies Varies Invalid data was received. Press the On-line switch and
eliminate the warning. Displayed when unsupported PDL
command is received or a spool command is received
without HDD.
(C5800/C5500)
On Off Manual paper feed is required. Manually insert the paper
shown by %MEDIA_SIZE%.
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
Paper size displays in Custom mode:
"<width>x<length><unit>"
ex.) 210x297mm
8.5x11.0inch
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
Oki Data CONFIDENTIAL
Description Level
Warning
Warning
Warning
Warning
Warning
147 /