Table of Contents
Advertisement
Specifications
Pins 1–48, 51–98......................................................
Environment
Operating Temperature ................................................ 0 to 70 C
Storage Temperature .................................................... -55 to 150 C
Relative humidity ......................................................... 5% to 90% noncondensing
Physical
Dimensions .................................................................. 3.9 in. by 6.5 in.
I/O connector................................................................ 100-pin male, ribbon-cable connector
Power Requirement (from PC I/O Channel)
Typ power .................................................................... 0.38 A at 5 VDC ( 5%)
Max power ................................................................... 0.8 A at 5 VDC ( 5%)
Note:
These power usage figures do not include the power used by external devices that are connected to the
fused supply present on the I/O connector.
Transfer Rates
The maximum average transfer rates for the PC-DIO-96 are shown as follows. The code used to make the
measurements follows the table. The assembly language code was assembled as inline assembly C code using
version 8.00 of the Microsoft Optimizing C Compiler. The C code was compiled using version 8.00 of the
Microsoft Optimizing C Compiler.
PC-DIO-96 User Manual
Level
Output high voltage
(I out = -2.5 mA)
Output low voltage
(I out = 2.5 mA)
Output current
(V
= 0.5 V)
O L
Output current
(V
= 2.7 V)
OH
A-2
© National Instruments Corporation
Appendix A
Min
Max
3.7 V
5.0 V
0.0 V
0.4 V
4 mA
—
4 mA
—
Advertisement
Table of Contents
