Table of Contents
Advertisement
Hardware Setup
2-2 UNPACKING THE MAINBOARD
When unpacking the mainboard, check for the following items:
Ø
The SY-D6IBA 82440 BX AGP/PCI Mainboard
Ø
The Quick Start Guide *
Ø
The Installation CD-ROM *
Ø
Two SCSI Driver Installation Diskettes
labeled "7800 Family Manager Set V2.10" (optional)
Ø
One IDE Device Flat Cable
Ø
One Floppy Disk Drive Flat Cable
Ø
One 50-pin Fast SCSI Cable (optional)
Ø
One 68-pin Ultra-Wide SCSI Cable (optional)
* If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning: Do not unpack the mainboard from its anti-static
packaging until you are ready to install it.
Like most electronic equipment, your mainboard may be damaged
by electrostatic discharge. To avoid permanent damage to
components ground yourself while working by using a grounding
strap. Otherwise, ground yourself frequently by touching the
unpainted portion of the computer chassis to drain the static
charges.
Handle the mainboard carefully, holding it by the edges.
You are now ready to start the installation.
7
SY-D6IBA
Advertisement
Table of Contents
