1. Manuals
  2. Brands
  3. SOYO Manuals
  4. Motherboard
  5. SY-7IS2
  6. User manual

SOYO SY-7IS2 User Manual

Fc-pga socket 370 processor supported 815ep agp/pci/cnr 66/100/133 mhz front side bus supported atx form factor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SY-7IS2
Motherboard
****************************************************
FC-PGA Socket 370 Processor supported
66/100/133 MHz Front Side Bus supported
****************************************************
815EP AGP/PCI/CNR
ATX Form Factor
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SY-7IS2 and is the answer not in the manual?

Questions and answers

Related Manuals for SOYO SY-7IS2

Summary of Contents for SOYO SY-7IS2

  • Page 1 SY-7IS2 Motherboard **************************************************** FC-PGA Socket 370 Processor supported 815EP AGP/PCI/CNR 66/100/133 MHz Front Side Bus supported ATX Form Factor **************************************************** User's Manual...
  • Page 2 It is the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and not to infringe upon or to cause others to infringe upon such rights.

  • Page 3: Table Of Contents

    Table of Contents CHAPTER 1 MOTHERBOARD DESCRIPTION ........1 INTRODUCTION ............1 HANDLING THE MOTHERBOARD ......3 ELECTROSTATIC DISCHARGE PRECAUTIONS ..3 SY-7IS2 MOTHERBOARD LAYOUT......4 SY-7IS2 MOTHERBOARD COMPONENTS ....5 CHIPSET .................7 I/O INTERFACE CONTROLLER ........12 HARDWARE MONITOR..........14 WAKE ON LAN TECHNOLOGY........14 CHAPTER 2 HARDWARE INSTALLATION ........15 PREPARATIONS ............15...
  • Page 4 Table of Contents SY-7IS2 INTEGRATED PERIPHERALS ........66 POWER MANAGEMENT SETUP ........71 PNP/PCI CONFIGURATION SETUP......75 PC HEALTH STATUS............78 LOAD FAIL-SAFE DEFAULTS........80 3-10 LOAD OPTIMIZED DEFAULTS........81 3-11 SUPERVISOR PASSWORD...........82 3-12 USER PASSWORD............83 CHAPTER 4 DRIVERS INSTALLATION ..........85...

  • Page 5: Chapter 1 Motherboard Description

    Supports USB Keyboard Wake Up Ø Power-on by modem, alarm and PS/2 Keyboard Ø Power failure resume Ø Supports Suspend to RAM Ø Supports onboard hardware monitoring and includes Hardware Doctor ™ utility Ø Easy CPU settings in BIOS with the “SOYO COMBO Setup”...
  • Page 6 Motherboard Description SY-7IS2 Ø Supports multiple-boot function Ø AGP 2.0 Compliant; AGP Universal Connector supports: - 1.5V and 3.3V AGP cards - 1X/2X/4X data transfer Ø Supports Communication Networking Riser Slot (CNR 1.0 compliant) * Ø Smart Card Reader - Compliant with Personal Computer Smart Card (PC/SC) Working...

  • Page 7: Handling The Motherboard

    Motherboard Description SY-7IS2 HANDLING THE MOTHERBOARD To avoid damage to your Motherboard, follow these simple rules while unpacking: Ø Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. Ø Remove the Motherboard from its anti-static packaging. Hold the Motherboard by the edges and avoid touching its components.

  • Page 8: Sy-7Is2 Motherboard Layout

    Motherboard Description SY-7IS2 1-4 SY-7IS2 MOTHERBOARD LAYOUT PS/2 KB PS/2 Mouse PS/2 Mouse Connector Connector ATX Power JP34 USB 1 USB 2 COM 1 IDE 2 IDE 1 COM 2 CPUFAN AGP Slot PCI#1 FDC1 Intel PCI#2 JP10 PCI#3 W O L...

  • Page 9: Sy-7Is2 Motherboard Components

    Motherboard Description SY-7IS2 1-5 SY-7IS2 MOTHERBOARD COMPONENTS...
  • Page 10 Motherboard Description SY-7IS2 Enable/Disable USB Keyboard Wake Up Jumper Enable/Disable Power-On by Keyboard Jumper CPU Voltage Adjust Setting Jumper Socket 370 Connector 32-bit AGP slot Intel FW82815EP Chip ATX Power Supply Connector DIMM Bank CPU Frequency Settings Jumper Bus Mastering E-IDE/ATAPI Ports...

  • Page 11: Chipset

    Motherboard Description SY-7IS2 1-6 CHIPSET The Intel ® 815EP Chipset is a high-flexibility chipset designed to extend from the basic graphics/multimedia PC platform up to the mainstream performance desktop platform. The chipset consists of a Memory Controller Hub (Intel ® 815EP MCH), an I/O Controller Hub2 (ICH2) for the I/O subsystem, and a Firmware Hub(FWH).
  • Page 12 Motherboard Description SY-7IS2 Upstream accelerated hub architecture interface for access to the MCH 1-6.2 Intel® 815EP MCH Overview The Intel ® 815EP MCH functions and capabilities include: Support Uni-processor system 64-bit AGTL+ based System Bus Interface at 66/100/133 MHz 32-bit Host Address Support...
  • Page 13 Motherboard Description SY-7IS2 The SDRAM controller interface is fully configurable through a set of control registers. The Intel ® 815EP MCH supports industry standard 64-bit wide DIMMs with SDRAM devices. The thirteen multiplexed address lines. SMAA[12:0], along with the two bank select lines, SBS[1:0], allow the Intel ®...
  • Page 14 Motherboard Description SY-7IS2 The AGP interface supports 4x AGP signaling. AGP semantic (PIPE# or SBA[7:0]) cycles to SDRAM are not snooped on the host bus. AGP FRAME# cycles to SDRAM are snooped on the host bus. The MCH supports PIPE# or SBA[7:0] AGP address mechanisms, but not both simultaneously.
  • Page 15 Motherboard Description SY-7IS2 1-6.7 IDE Support The motherboard has two independent bus-mastering PCI IDE interfaces. These interfaces support PIO Mode3, PIO Mode 4, PIO Mode 5 ATAPI devices (e.g., CD-ROM), and Ultra DMA 33/66/100 synchronous-DMA mode transfers. The BIOS supports logical block addressing (LBA) and extended cylinder head sector (ECHS) translation modes.

  • Page 16: I/O Interface Controller

    Motherboard Description SY-7IS2 1-6.8 Real-Time Clock The real-time clock supports 256 bytes of battery-backed CMOS SRAM. Hardware implementation to indicate century rollover. 1-7 I/O INTERFACE CONTROLLER The motherboard uses the ITE IT8712F-A I/O controller which features: Single diskette drive interface...
  • Page 17 Motherboard Description SY-7IS2 program, the diskette drive interface can be configured for the following diskette drive capacities and sizes. 360 KB, 5.25-inch 1.2 MB, 5.25-inch 720 KB, 3.5-inch 1.2 MB. 3.5-inch (driver required) 1.25-1.44 MB, 3.5-inch 2.88 MB, 3.5-inch 1-7.4 PS/2 Keyboard and Mouse Interface PS/2 keyboard and mouse connectors are located on the back panel of the motherboard.

  • Page 18: Hardware Monitor

    Motherboard Description SY-7IS2 1-8 HARDWARE MONITOR The optional hardware monitor subsystem provides low-cost instrumentation capabilities. The features of the hardware monitor subsystem include: Ø An integrated ambient temperature sensor Ø Fan speed sensors, which monitor the fan 1 and fan 2 connectors Ø...

  • Page 19: Chapter 2 Hardware Installation

    SY-7IS2 Chapter 2 HARDWARE INSTALLATION Congratulations on your purchase of SY-7IS2 Motherboard. You are about to install and connect your new Motherboard. Note: Do not unpack the Motherboard from its protective anti- static packaging until you have made the following preparations.

  • Page 20: Unpacking The Motherboard

    Hardware Installation SY-7IS2 UNPACKING THE MOTHERBOARD When unpacking the Motherboard, check for the following items: u The SY-7IS2 815EP AGP/PCI/CNR Motherboard u This Quick Start Guide u The Installation CD-ROM u SOYO Bonus Pack CD-ROM u One IDE Device ATA 100 Flat Cable...

  • Page 21: Installation Guide

    Hardware Installation SY-7IS2 2-3 INSTALLATION GUIDE We will now begin the installation of the Motherboard. Please follow the step-by-step procedure designed to lead you to a complete and correct installation. Warning: Turn off the power to the Motherboard, system chassis, and peripheral devices before performing any work on the Motherboard or system.

  • Page 22: 2-3.1 Cpu Installation

    Hardware Installation SY-7IS2 2-3.1 CPU Installation To perform the installation of your new SY-7IS2 Motherboard, follow the steps below: Mark your CPU Frequency: Record the working frequency of your FC-PGA CPU that should be clearly marked on the CPU cover.
  • Page 23 Hardware Installation SY-7IS2 Align the blunt edge of the CPU with the matching pinhole distinctive edge on the socket. Seat the processor in the socket completely and without forcing.
  • Page 24 Hardware Installation SY-7IS2 Then close the socket handle to secure the CPU in place. Remember to connect the CPU Cooling Fan to the appropriate power connector on the Motherboard. The fan is a key component that will ensure system stability. The fan prevents overheating, therefore prolonging the life of your CPU.

  • Page 25: 2-3.2 Sdram Memory Module Installation

    Hardware Installation SY-7IS2 2-3.2 SDRAM Memory Module Installation Your board comes with two DIMM sockets, providing support for up to 512MB of main memory using unbuffered and Non-ECC DIMM modules from 32MB to 512MB, No registered DIMM support. Supports up to 3 Double sided DIMMs at 100MHz system memory.
  • Page 26 Hardware Installation SY-7IS2 Memory Configuration Table Number of Memory DIMM 1 DIMM 2 DIMM 3 Modules Single-Side PC100/PC133 PC100/PC133 PC100/PC133 PC100 PC100 P100 Type Double-Side PC133 PC133 PC133 PC133 Memory Module Size 32/64/128/256/512 MB (MB)

  • Page 27: 2-3.3 Motherboard Connector

    Hardware Installation SY-7IS2 2-3.3 Motherboard Connector 2-3.3.1 IDE Device Installation (HDD, CD-ROM) Pin -1 IDE 2 IDE 1 Secondary Primary This Motherboard offers two IDE device connectors, a primary (IDE1) and a secondary (IDE2). It can support up to four high-speed HDD or CD- ROM.
  • Page 28 Hardware Installation SY-7IS2 2-3.3.2 Floppy Drive Installation Pin -1 Floppy Drive Connector The system supports 5 possible floppy drive types: 720 KB, 1.2 MB, 1.44 MB, 2.88 MB, and LS-120. In addition, this Motherboard supports a 3-mode (720KB/1.2MB/1.44MB) floppy commonly used in Japan.
  • Page 29 Hardware Installation SY-7IS2 2-3.3.3 Front Panel Connections Power Reset PWRBT Key Lock Speaker Plug the computer case's front panel devices to the corresponding headers on the Motherboard. 1. Power LED & KeyLock Plug the Power LED cable into the 5-pin Keylock header.
  • Page 30 Hardware Installation SY-7IS2 2. Reset Plug the Reset push-button cable into the 2-pin Reset header on the Motherboard. Pushing the Reset button on the front panel will cause the system to restart the boot-up sequence. Reset Pin Assignment Power Good 3.
  • Page 31 Hardware Installation SY-7IS2 5. IDE LED Attach the 2-pin IDE device LED cable to the corresponding IDE LED header on the Motherboard. This will cause the LED to lighten when an IDE (HDD, CD-ROM) device is active. HDD LED Pin Assignment LED Anode LED Cathode 6.
  • Page 32 Hardware Installation SY-7IS2 2-3.3.4 Back Panel Connections All external devices such as the PS/2 keyboard, PS/2 mouse, printer, modem, USB can be plugged directly onto the Motherboard back panel. Only after you have fixed and locked the Motherboard to the computer case can you start connecting the external peripheral devices.
  • Page 33 Hardware Installation SY-7IS2 1. Onboard Serial Ports COM1/COM2 External peripherals that use serial transmission scheme include: serial mouse, and modem. Plug the serial device cables directly into the COM1/COM2 9-pin male connectors located at the rear panel of the Motherboard.
  • Page 34 Hardware Installation SY-7IS2 5. Universal Serial Bus USB1/USB2/(USB3, USB4) This Motherboard provides four USB ports for your additional devices. Plug the USB device jack into the available USB connector USB1 or USB2. Standard device drivers come with the Win98 for commonly used USB devices.
  • Page 35 Hardware Installation SY-7IS2 2-3.3.5 Other Connections 1. Wake-On-LAN (WOL) Attach the 3-pin connector from the LAN card which supports the Wake- On-LAN (WOL) function to the JP44 header on the Motherboard. This WOL function lets users wake up the connected computer through the LAN card.
  • Page 36 Hardware Installation SY-7IS2 2. Infrared (IR1) Plug the 5-pin infrared device cable to the IR1 header. This will enable the infrared transfer function. This Motherboard meets both the ASKIR and HPSIR specifications. Please install according to the following pin assignment:...
  • Page 37 CPUFAN connector on the Motherboard. The fan will stop when the system enters into Suspend Mode. (Suspend mode can be enabled from the BIOS Setup Utility, [Soyo Combo] menu.) To avoid damage to the system, install according to the following pin...

  • Page 38: System Fan

    Hardware Installation SY-7IS2 (2) Chassis Cooling Fan Some chassis also feature a cooling fan. This Motherboard features a CHAFAN connector to provide 12V power to the chassis fan. Connect the cable from the chassis fan to the CHAFAN 3-pin connector. Install...
  • Page 39 Hardware Installation SY-7IS2 4. Smart Card Reader 2-3.3.6 AGP VGA Card This motherboard comes with integrated AGP subsystem therefore, AGP VGA card is not needed. Other Display Cards: Insert other types of VGA cards into the AGP or PCI expansion slots according to card specifications.

  • Page 40: Atx Power

    Hardware Installation SY-7IS2 2-3.3.7 ATX Power Supply Plug the connector from the power directly into the 20-pin male ATX PW connector on the Motherboard, as shown in the following figure. ATX Power Warning: Follow these precautions to preserve your Motherboard from any remnant currents when connecting to...
  • Page 41 Hardware Installation SY-7IS2 Please install the ATX power according to the following pin assignment: ATX Power 5VSB PW-OK Ø Pay special care to the directionality. PS-ON 3.3V -12V 3.3V 3.3V 2-3.3.8 CNR (Communication Networking Riser)Connector This motherboard supports CNR (Communication Networking Riser) slot...

  • Page 42: 2-3.4 Jumper Setting

    Short pin 2-3 Short pin 4-5 +7.5% Short pin 5-6 Note:Increasing voltage maybe DAMAGE CPU! SOYO suggest that CPU voltage setting in normal mode. Enable/Disable Power-On by Keyboard (JP1) Step 2. You may choose to enable the Power-On through Keyboard function by shorting pin 1-2 on jumper JP1;...
  • Page 43 Hardware Installation SY-7IS2 Enable/Disable USB Keyboard Wake Up(JP34) Step 3. You may choose to enable the USB Keyboard Wake Up function by shorting pin 2-3 on jumper JP34; or short pin 1-2 to disable this function. USB Keyboard Enable Disable...
  • Page 44 Frequency the CPU specifies. If CJ1 and CJ2 are to be used, JP6 & JP7 must be open. Doing so may however force your CPU to operate out of its specifications and therefore SOYO can not guarantee the proper functioning of your system.

  • Page 45: 2-3.5 Voice Doctor

    Hardware Installation SY-7IS2 2-3.5 Voice Doctor If the system does not boot-up properly, the Voice Doctor will inform the user by voice through internal/external speaker at what point in boot-up sequence the problem arises. Below are the possible errors the user may encounter:...

  • Page 46: 2-3.7 Power On

    Hardware Installation SY-7IS2 2-3.7 Power On You have now completed the hardware installation of your Motherboard successfully. 1. Turn the power on 2. To enter the BIOS Setup Utility, press the <DEL> key while the system is performing the diagnostic checks, Note: If you have failed to enter the BIOS, wait until the boot up sequence is completed.

  • Page 47: 2-3.8 Quick Bios Setup

    This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP] combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS.
  • Page 48 Hardware Installation SY-7IS2 Step 1. Select [STANDARD CMOS SETUP] Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”. Step 2. Select [LOAD SETUP DEFAULT] Select the “LOAD SETUP DEFAULT” menu and type “Y” at the prompt to load the BIOS optimal setup.

  • Page 49: 2-3.9 Troubleshooting At First Start

    2-3.9 Troubleshooting at First Start Video (no display) related issues I built a new computer system using a Soyo board and nothing happens when turning it on, no video and no beeps from the PC speaker. What is happening and how can it be fixed? No screen and no beeps mean that your CPU and motherboard do not work at all.

  • Page 50: Bios Issues

    5EH_2CA1 (meaning revision 2CA1 for the SY-5EH board) or 6BA+ IV_2AA2 which means SY-6BA+ IV motherboard with 2AA2 bios. Where can I find the latest BIOS of my motherboard? Please go to the technical support page of one of the SOYO websites www.soyo.com.tw (Taiwan: ), and look up your motherboard to find the latest BIOS revision.

  • Page 51: Audio Issues

    Why? If you are sure that the modem driver has been installed correctly, then you need to install the south bridge driver from the SOYO CD, this is because Windows does not properly recognize relatively new chipsets.
  • Page 52 If you are running a Cyrix CPU, make sure the 'linear burst function' is enabled in the bios. I can not get my board to run properly. Please make sure you have the latest bios and driver from the SOYO web site at: http://www.soyo.com...

  • Page 53: 2-3.10 Power Off

    Select [Save & Exit SETUP] and press <Enter> to save the new configuration to the CMOS memory, and continue the boot sequence. Note: SOYO does not guarantee system stability if the user over clocks the system. Any malfunctions due to over-clocking are not covered by the warranty.

  • Page 54: Chapter 3 Bios Setup Utility

    BIOS Setup Utility SY-7IS2 Chapter 3 BIOS SETUP UTILITY This Motherboard's BIOS setup program uses the ROM PCI/ISA BIOS program from Award Software Inc. To enter the Award BIOS program's Main Menu: 1. Turn on or reboot the system. 2. After the diagnostic checks, press the [Del] key to enter the Award BIOS Setup Utility.
  • Page 55 BIOS Setup Utility SY-7IS2 Hot Keys: Function keys give you access to a group of commands throughout the BIOS utility. Function Command Description Gives the list of options available for each General Help item. Previous Restore the old values. These are the values Values that the user started the current session with.

  • Page 56: Save And Exit Setup

    BIOS Setup Utility SY-7IS2 SAVE AND EXIT SETUP Select the [SAVE & EXIT SETUP] option from the Main Menu to save data to CMOS and exit the setup utility. This option saves all your changes and causes the system to reboot.

  • Page 57: Soyo Combo Setup

    <DEL> key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will display on screen. Then, select the [SOYO COMBO SETUP] option from the main menu and press the <Enter> key.
  • Page 58 BIOS Setup Utility SY-7IS2 3-1.1 Quick CPU Frequency Setup Quick CPU Setting Description Frequency Setup Select the host clock of your CPU Host/ Default 110/37MHz/NO Socket 370 processor among these PCI Clock 66/33MHz/NO 115/38MHz/NO values. 68/35MHz/NO 133/33MHz/Yes Note: For the 815 chipset, 66,...
  • Page 59 BIOS Setup Utility SY-7IS2 Frequency/ Voltage Control (Continued) Setting Description Note Disabled This item allows you to enable/disable Default Spread Spectrum Enabled the spread spectrum modulate 3-1.4 C.I.H. 4-WAY Protection Settings Setting Description Note Disabled When set to enabled, the BIOS can C.I.H.
  • Page 60 BIOS Setup Utility SY-7IS2 System Memory Control Setting (Continued) System Memory Setting Description Note Control Setting SDRAM RAS- Default Use the default setting to-CAS Delay SDRAM RAS If an insufficient number of cycles is Default Precharge Time allowed for the RAS to accumulate...

  • Page 61: Standard Cmos Setup

    BIOS Setup Utility SY-7IS2 3-2 STANDARD CMOS SETUP Select the [STANDARD CMOS SETUP] option from the Main Menu and press [Enter] key. CMOS Setup Utility – Copyright ( C ) 1984-2000 Award Software Standard CMOS Features Date (mm:dd:yy) Sat, Jan 1 2000...
  • Page 62 BIOS Setup Utility SY-7IS2 3-2.2 Hard Disks Type & Mode Choose the type and mode for the hard disks that you have already installed. Primary Setting Description Note (Secondary) Master & Slave Press To auto-detect the HDD’s size, IDE HDD Auto- Enter head …...
  • Page 63 BIOS Setup Utility SY-7IS2 3-2.4 Others Optional Setting Description Note EGA/VGA Select the video mode. Default Video CGA 40 CGA 80 MONO (Monochrome) Halt On ALL Errors When the BIOS detects system Default errors, this function will stop the No Errors system.

  • Page 64: Advanced Bios Features

    BIOS Setup Utility SY-7IS2 3-3 ADVANCED BIOS FEATURES Select the [Advanced BIOS Features] option from the Main Menu and press [Enter] key. CMOS Setup Utility – Copyright ( C ) 1984-2000 Award Software Advanced BIOS Features Virus Warning [Disabled] Item Help...
  • Page 65 BIOS Setup Utility SY-7IS2 3-3.1 Virus Warning Setting Description Note Disabled Allows you to choose the Default Virus Warning VIRUS warning feature for Enabled IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area,...
  • Page 66 BIOS Setup Utility SY-7IS2 3-3.5 Boot Up NumLock Status Setting Description Note Boot Up Puts numeric keypad in Default NumLock NumLock mode at boot-up. Status Puts numeric keypad in arrow key mode at boot-up. 3-3.6 Gate A20 Options Setting Description...
  • Page 67 BIOS Setup Utility SY-7IS2 3-3.8 Security Option Use this feature to prevent unauthorized system boot-up or use of BIOS Setup. The following table describes the security settings. Setting Description System Each time the system is booted, the Security Option password prompt appears.

  • Page 68: Advanced Chipset Features

    BIOS Setup Utility SY-7IS2 3-4 ADVANCED CHIPSET FEATURES Caution: Change these settings only if you are already familiar with the Chipset. The [Advanced Chipset Features] option changes the values of the chipset registers. These registers control the system options in the computer.
  • Page 69 BIOS Setup Utility SY-7IS2 CHIPSET FEATURES SETUP CHIPSET Setting Description Note FEATURES System BIOS Disabled Default Cacheable Enabled The ROM area F0000H-FFFFFH is cacheable. Disabled Default Video BIOS Cacheable Enabled The video BIOS C0000H-C7FFFH is cacheable. Memory Disabled Default Hole At 15M-...

  • Page 70: Integrated Peripherals

    BIOS Setup Utility SY-7IS2 3-5 INTEGRATED PERIPHERALS Caution: Change these settings only if you are already familiar with the Chipset. The [INTEGRATED PERIPHERALS] option changes the values of the chipset registers. These registers control the system options in the computer.
  • Page 71 BIOS Setup Utility SY-7IS2 The following tables describe each field in the INTEGRATED PERIPHERALS Menu and provide instructions on how to configure the IDE controls, FDC controls, and the onboard serial and parallel ports. 3-5.1 IDE Device Controls IDE Controls...
  • Page 72 BIOS Setup Utility SY-7IS2 3-5.3 IDE HDD Block Mode Setting Description Note Disabled IDE HDD Block Mode Enabled Invokes multi-sector Default transfer instead of one sector per transfer. Not all HDDs support this function. 3-5.4 Others Optional Setting Description Note...
  • Page 73 BIOS Setup Utility SY-7IS2 3-5.6 Onboard Serial Ports Onboard Serial Setting Description Note Ports Disabled Onboard Serial Port 1 / 3F8/IRQ4 Choose serial port 1 & 2's I/O Default Serial Port 2 address. (port 1) Do not set port 1 & 2 to the...
  • Page 74 BIOS Setup Utility SY-7IS2 3-5.8 Others Optional Setting Description Note PWRON After The system will switch on PWR-Fail when power comes back after a power failure. The system will remain off Default when power comes back after a power failure.

  • Page 75: Power Management Setup

    BIOS Setup Utility SY-7IS2 3-6 POWER MANAGEMENT SETUP The [POWER MANAGEMENT SETUP] sets the system's power saving functions. CMOS Setup Utility – Copyright ( C ) 1984-2000 Award Software Power Management Setup ACPI Suspend Type [S1(POS)] Item Help Power Management...
  • Page 76 BIOS Setup Utility SY-7IS2 3-6.1 Power Management Controls Power Setting Description Note Management Controls S1(POS) The system will enter the S1 Default ACPI Suspend state during suspend. (Low Type S3(STR) latency wake up) Power User Define Lets you define the HDD and...
  • Page 77 BIOS Setup Utility SY-7IS2 Power Management Controls (Continued) Power Setting Description Note Management Controls Disabled Default HDD Power Down Some older 1-15Min When the set time has model HDDs elapsed, BIOS sends a may not support command to the HDD to this advanced power down.
  • Page 78 BIOS Setup Utility SY-7IS2 3-6.2 Reload Global Timer Events Power Down Setting Description Note & Resume Events Disabled Default IDE0, IDE1 Ø Primary Enabled In effect, the system remains alert Ø Secondary for anything which occurs to a device which is configured as Enabled.

  • Page 79: Pnp/Pci Configuration Setup

    BIOS Setup Utility SY-7IS2 3-7 PNP/PCI CONFIGURATION SETUP This option sets the Motherboard's PCI Slots. CMOS Setup Utility – Copyright ( C ) 1984-2000 Award Software PnP/PCI Configurations Reset Configuration Data [Disabled] Item Help Resources Controlled By [Auto (ESCD)] Menu Level 4...
  • Page 80 BIOS Setup Utility SY-7IS2 3-7.1 PNP/PCI Configuration Controls PNP/PCI Setting Description Note Controls Reset Disabled Retain PnP configuration Default Configuration data in BIOS. Data Enabled Reset PnP configuration data in BIOS. Manual BIOS does not manage PCI/ISA PnP Resources card IRQ assignment.
  • Page 81 BIOS Setup Utility SY-7IS2 PNP/PCI Configuration Setup (Continued) PNP/PCI Setting Description Note Setup Interrupt How to set the BIOS to release the IRQ to the PnP Interrupt pool: Line PnP / PCI configuration Integrated Peripherals IRQ 15 IRQ 15: PCI / ISA PnP On-Chip Secondary PCI IDE: disabled...

  • Page 82: Pc Health Status

    BIOS Setup Utility SY-7IS2 3-8 PC HEALTH STATUS This option sets the Motherboard's PC Health Status. CMOS Setup Utility – Copyright ( C ) 1984-2000 Award Software PC Health Status Shutdown Temperature [Disabled] Item Help Vcore 1.58 V 1.45 V Menu Level 4 3.3V...
  • Page 83 BIOS Setup Utility SY-7IS2 3-8.1 CPU Device Monitoring CPU Device Setting Description Note Monitoring Shutdown Disabled This item allows you to set up Default Temperature the CPU shutdown Temperature. 60°C/140°F, This item only effective under 65°C/149°F, Windows 98 ACPI mode.

  • Page 84: Load Fail-Safe Defaults

    BIOS Setup Utility SY-7IS2 3-9 LOAD FAIL-SAFE DEFAULTS Select the [Load Fail-Safe Defaults] option from the Main Menu to load the system values you have previously saved. This option is recommended if you need to reset the system setup and to retrieve the old values.

  • Page 85: Load Optimized Defaults

    BIOS Setup Utility SY-7IS2 3-10 LOAD OPTIMIZED DEFAULTS Select the [Load Optimized Defaults] option from the Main Menu to load the system values you have previously saved. This option is recommended if you need to reset the system setup and to retrieve the old values.

  • Page 86: Supervisor Password

    BIOS Setup Utility SY-7IS2 3-11 SUPERVISOR PASSWORD Based on the setting you have made in the [Security Option] of the [BIOS FEATURES SETUP] section, the password prevents access to the system or the setup program by unauthorized users. Follow this procedure to set a...

  • Page 87: User Password

    BIOS Setup Utility SY-7IS2 Enter your new password and press [Enter]. The following message appears, prompting to confirm the new password: Confirm Password: Re-enter your password and then press [Enter] to exit to the Main Menu. This diagram outlines the password selection procedure: ↔...

  • Page 88: Boot Menu

    BIOS Setup Utility SY-7IS2 Boot Menu Boot Menu enables user to boot-up on different boot device without going into the BIOS setup. To enable boot Menu, press “ESC” after memory initialization, user will see a device menu, in which user can choose on which device they wish to boot from.

  • Page 89: Chapter 4 Drivers Installation

    7IWB V1.0 6IWM 7IWM 6IWA 7IWM/L V1 Cancel (SOYO CD Start Up Program Menu) If you use Windows 95 or 98, the SOYO CD Start Up Program automatically detects which SOYO Motherboard you own and displays the corresponding model name.
  • Page 90 Drivers installation SY-7IS2 The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it.
  • Page 91 Drivers installation SY-7IS2 Step 2. Install Drivers and Utilities Click the Install Drivers button to display the list of drivers software that can be installed with your Motherboard. The Start Up program displays the drivers available for the particular model of Motherboard you own. We recommend that you only install those drivers.
  • Page 92 Step 3. Check the Latest Releases Click the 'Check the latest Releases' button to go the SOYO Website to automatically find the latest BIOS, manual and driver releases for your motherboard. This button will only work if your computer is connected to the internet through a network or modem connection.
  • Page 93 Intel 815 VGA Drivers Installation SY-7IS2...

Table of Contents