Table of Contents
Advertisement
Hardware Setup
Available [CPU Frequency] settings on your SY-D6IBA Mainboard
are detailed in the following table. If you set this field to [Manual],
you are then required to fill in the next two consecutive fields: (1) the
CPU Host Clock, and (2) the CPU Ratio.
CPU Frequency
233MHz (66 x 3.5)
266MHz (66 x 4.0)
300MHz (66 x 4.5)
333MHz (66 x 5.0)
350MHz (100 x 3.5)
400MHz (100 x 4.0)
450MHz (100 x 4.5)
500MHz (100 x 5.0)
550MHz (100 x 5.5)
4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory,
and continue the boot sequence.
Step 17. Power Off
There are two possible ways to turn off the system:
1.
Use the Shutdown command in the Start Menu of Windows
95/98 to turn off your computer.
2.
Press the mechanical power-button and hold down for over 4
seconds, to shutdown the computer. If you press the power-
button for less than 4 seconds, then your system will enter into
Suspend Mode.
Select the working frequency of
your Pentium
among these preset values.
Note:
Mark the checkbox
that corresponds to the working
frequency of your Pentium
processor in case the CMOS
configuration should be lost.
You can also write your own
frequency combination in the
space provided.
27
SY-D6IBA
®
II processor
®
II
Advertisement
Table of Contents
