Table of Contents
Advertisement
Hardware Setup
2-3 INSTALLATION GUIDE
We will now begin the installation of the mainboard. Please follow
the step-by-step procedure designed to lead you to a complete and
correct installation.
Warning: Turn off the power to the mainboard, system chassis, and
peripheral devices before performing any work on the mainboard or
system.
BEGIN THE INSTALLATION
Step 1. Single or Dual CPU Installation
Notice 1 (Dual processor): When installing two processors
(Dual CPU), please make sure the front side bus and working
frequency are identical for both processors.
Notice 2 (Single processor): If you are using a single
processor, preferably install the processor in Slot 1 #1, leaving
Slot 1 #2 empty for future expansion to dual CPU.
Your SY-D6IBA mainboard comes with two CPU retention set kits.
The retention set is used to hold each Single or Dual Pentium
processor attached to the Slot 1 #1 or Slot1 #2 CPU connectors on
the mainboard.
Follow these instructions to install your Pentium
correctly.
8
SY-D6IBA
®
®
II processor
II
Advertisement
Table of Contents
