Cpu Frequency; Cpu Ratio - SOYO SY-D6IBA User Manual

Hide thumbs Also See for SY-D6IBA:
Table of Contents

Advertisement

Hardware Setup
Step 16. Quick BIOS Setup
This mainboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the
BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP]
menu combines the main parameters that you need to configure, all
in one menu, for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on,
then press the <DEL> key during the system diagnostic checks to
enter the Award BIOS Setup program. The CMOS SETUP UTILITY
will display on screen. Follow these steps to configure the CPU
settings.
1. Select [LOAD SETUP DEFAULT]
Select the "LOAD SETUP DEFAULT" menu and type "Y" at the
prompt to load the BIOS optimal setup.
2. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
"Auto".
3. Select [SOYO COMBO SETUP]
Move the cursor to the [CPU Frequency] field to set the CPU
working frequency, as shown in the following display.

CPU Frequency

CPU Host Clock

CPU Ratio

CPU Frequency
: 233Mhz(66*3.5)
CPU Host Clock
: 66MHz
CPU Ratio
: x 3.5
CPU L2 Cache ECC Checking
Boot Sequence
: A,C,SCSI
Quick Power On Self Test
: 233Mhz(66*3.5)
POWER ON Function
: BUTTON ONLY
KB Power ON Password
: Enter
Hot Key Power ON
: Ctrl-F1
: 66MHz
Soft-Off by PWR-BTTN
: Instant-Off
: x 3.5
Power-On by Ring/LAN
: Enabled
Power-On by Alarm
: Disabled
26
ROM PCI/ISA BIOS
SOYO COMBO SETUP
AWARD SOFTWARE, INC.
CPU Warning Temperature
Current System Temp.
Current CPU1 Temperature
Current CPU2 Temperature
: Enabled
Current CPUFAN1 Speed
Current CPUFAN2 Speed
Current CPUFAN3 Speed
: Enabled
CPU1(V)
: 2.81 V
+3.3 V
: 3.40 V
+12 V
: 12.16V
- 5 V
: - 5.26V
CPUFAN Off In Suspend
ESC
: Quit
F1
: Help
F5
: Old Values
F6
: Load BIOS Defaults
F7
: Load Setup Defaults
SY-D6IBA
: Disabled
: 24 ° C/75 ° F
: 29°C/84°F
: 29°C/84°F
: 4891 RPM
: 4891 RPM
: 6553 RPM
CPU2(V)
: 2.81V
+5 V
: 5.25V
-12 V
: -12.15V
: Enabled
↑ ↓ → ←
: Select Item
PU/PD/+/-
: Modify
(Shift) F2
: Color

Advertisement

Table of Contents
loading

Table of Contents