Led Indicators - National Instruments NI WLS/ENET-9163 User Manual

LED Indicators

LED Description
10/100
LINK/ACT
POWER
STATUS
ACTIVE
*
WLS LINK
* NI WLS-9163 Only
© National Instruments Corporation
The LED indicators for the NI WLS/ENET-9000 Series device are listed in
Table 2.
Table 2. LED State/Device Status
Color
Green On
Off
Yellow On
Off
Blinking
Green On
Off
Yellow On
Off
1 Blink
2 Blinks
3 Blinks
Green On
Off
Green On
Off
LED State
Connected at 100 Mbps
No Ethernet connection or 10 Mbps
connection
Ethernet link
No Ethernet connection
Ethernet activity
Power on
Power off
Device firmware booting or
resetting to factory default
Normal operation
No C Series module detected
Firmware/FPGA image corrupted,
update firmware through MAX
Firmware error, reboot
A DAQ task is running on the
device
Device available
Connected and authenticated
Not connected to access point
15 NI WLS/ENET-9163 Carrier User Guide and Specifications
Device Status