Appendix B Connecting I/O Signals - National Instruments NI PXI-7831R User Manual

Connecting I/O Signals
© National Instruments Corporation
This appendix describes how to make input and output signal connections
to the NI PXI-7831R I/O connectors.
The NI PXI-7831R has two DIO connectors with 40 DIO lines per
connector, and one MIO connector with eight AI lines, eight AO lines, and
16 DIO lines.
Figure B-1 shows the I/O connector locations for the NI PXI-7831R.
The I/O connectors are numbered starting at zero. The text in parentheses
indicates whether each I/O connector is an MIO connector or a DIO
connector.
B-1
B
NI PXI-7831R User Manual