Philips RQ1200 series Instruction Manual page 36

English
36
Problem
The shaver is
not fully charged
after I charge it
in the charger/
Jet Clean
System.
RQ129x/
RQ128x: The
shaver is fully
charged, but the
display shows
less than 60
shaving minutes.
RQ1008: The
operating
time of the Jet
Clean System
is suddenly
shorter or
longer than it
used to be.
Possible cause
You have not placed the
shaver in the charger/Jet
Clean System (specific types
only) properly.
The shaver is equipped with
an intelligent self-learning
system that monitors the
shaver's energy consumption
and converts the remaining
battery capacity into
shaving minutes. The energy
consumption and therefore
the remaining number of
shaving minutes depend on
your skin and beard type
and your shaving behaviour
(e.g. the use of shaving gel).
You have selected another
cleaning program. The Jet
Clean System has three
cleaning programs: the
eco program, the normal
program and the intensive
program. Each of these
programs has a different
operating time.
Solution
Make sure you press
the shaver until it
locks into place.
If the number of
shaving minutes of
the fully charged
shaver is less than
60 minutes, this
is completely
normal and does
not mean that the
battery capacity
of the shaver has
diminished.
Press the up/down
button on the Jet
Clean System to
select the cleaning
program of your
preference (see
chapter 'Cleaning and
maintenance').