Philips RQ1200 series Instruction Manual page 16

English
16
Charging in the Jet Clean System (specific
types only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder
with the back of the shaver pointing towards
the holder.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
Note: RQ129x only: when you turn the shaver upside
down, the minutes indication on the display is also
turned upside down so you can still see to what level
the battery is charged.
4 Place the shaver body in the holder behind the
two clips (1) and press it down until it locks
into place (2).
, The display shows that the shaver is charging
(see section 'Charging' in chapter 'The display').
Using the shaver
shaving
skin adaptation period
Your first shaves may not bring you the result you
expect and your skin may even become slightly
irritated. This is normal. Your skin and beard need
time to adapt to any new shaving system.