Philips RQ1200 series Instruction Manual page 13

Note: The displays of the various shaver types look
different, but show the same symbol.
- To remind you to replace the shaving unit,
the appliance is equipped with a replacement
reminder which is activated automatically after
MINUTES LEFT
approx. two years. The replacement reminder is
repeated at 9 successive shaves (specific types
only) or until you reset the shaver (specific types
only).
Travel lock (RQ128x/RQ127x/RQ126x/
RQ125x only)
You can lock the shaver when you are going to
travel. The travel lock prevents the shaver from being
switched on by accident.
Note: The displays of the various shaver types look
different, but show the same symbol.
Activating the travel lock
1
, RQ128x: The display starts to count down
from 3. At 1, the appliance beeps to indicate that
it is locked.
, The lock symbol lights up on the display. After a
few seconds it goes out.
Deactivating the travel lock
1
, The motor starts running to indicate that the
travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-
in charger or Jet Clean System, the travel lock is
automatically deactivated.
Press the on/off button for 3 seconds to enter
the travel lock mode.
Press the on/off button for 3 seconds.
English
13