Philips RQ1200 series Instruction Manual page 14

English
14
MINUTES LEFT
Power-saving mode (RQ129x only)
The appliance is equipped with an automatic power-
saving mode. When the shaver enters the power-
saving mode, the light in the on/off button goes out
to save energy.
- When the appliance is switched off but detects
movement for 5 minutes (for instance when you
are travelling with the shaver in your suitcase), it
automatically goes into power-saving mode. This
mode prevents the shaver from being switched on
by accident.
, The lock symbol flashes on the display to
indicate that the appliance is in power-saving
mode.
- To deactivate the power-saving mode, simply press
the on/off button.
Blocked shaving heads
Note: The displays of the various shaver types look
different, but show the same symbol.
- If the shaving heads are blocked, the shaving unit
symbol, the tap symbol and the exclamation mark
flash. In this case, the motor cannot run because
the shaving heads are soiled or damaged.
- When this happens, you have to clean the shaving
unit or replace it.
- The shaving unit symbol, the tap symbol and
the exclamation mark continue to flash until you
unblock the shaving heads.
Charging
Charging takes approx. 1 hour.
RQ129x/RQ128x/RQ127x/RQ126x: A fully charged
shaver has a shaving time of up to 60 minutes or 20
days.