Philips RQ1200 series Instruction Manual page 30

English
30
MINUTES LEFT
storage
1 Slide the protection cap onto the shaving unit
to prevent damage to the shaving heads.
2 Store the shaver in the pouch supplied.
Replacement
For maximum shaving performance, we advise you
to replace the shaving unit every two years.
Only replace the shaving unit with an original RQ12
Philips Shaving unit.
1 The shaving unit symbol flashes (all types) and
you hear a beep (RQ129x/RQ128x only) when
you switch off the shaver .
Note: The displays of the different types look different,
but show the same symbol.
2 Pull the old shaving unit straight off the shaver.
Note: Do not twist the shaving unit while you pull it off
the shaver.
3 Insert the lug of the new RQ12 shaving unit
into the slot in the top of the shaver (1). Then
press down the shaving unit (2) to attach it to
the shaver ('click').
4 RQ128x/RQ127x/RQ126x/RQ125x: To reset
the shaver, press and hold the on/off button for
approx. 10 seconds.