Philips RQ1200 series Instruction Manual page 25

Note: RQ1007: The cleaning program takes 4 to 6
minutes.
Note: RQ1008: The auto and eco cleaning programs
take 4 to 6 minutes. The intensive program takes
approx. 35 minutes.
, During the first phase of the cleaning program,
the shaver automatically switches on and off
several times and moves up and down.
, During the second phase of the cleaning
program, the shaver is placed in the drying
position, indicated by the flashing drying symbol.
This phase takes approx. 2 hours. The shaver
stays in this position until the end of the
program.
Note: RQ1008: The drying phase takes 1 hour when
you have selected the eco program.
, After the cleaning program, the charging
indication appears on the shaver display (see
chapter 'The display').
Note: If you press the on/off button of the Jet
Clean System during the cleaning program, the
program aborts. In this case, the cleaning or drying
light stops flashing and the holder moves to the highest
position.
Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts. The
holder remains in its current position. When you put
the adapter back into the wall socket, the holder moves
to the highest position.
- When the cleaning fluid drops below the
minimum level, the 'cleaning chamber empty'
symbol starts to flash and the holder returns to its
starting position.
English
25