Table of Contents
Advertisement
Thank you for choosing a Belling appli-
ance
We hope that the following information
will help you to familiarise yourself with
the features of the appliance, and to use
it successfully and safely.
Our policy is one of constant
opment and improvement. Strict accu-
racy of illustrations and specifications is not
guaranteed.
Modification to design
and materials may be
subsequent to publication.
Please read the instructions in this hand-
book before using or installing this
appliance.
Your 1st Year Guarantee
To fulfil the conditions of your guarantee,
this appliance must be correctly
installed and operated, in accordance
with these instructions, and only be
used for normal domestic purposes.
Please note that the guarantee, and
Service availability, only apply to the
UK and Republic of Ireland.
Before using the appliance for the
first time, remove any protective poly-
thene film and wash the oven shelves
and furniture in hot soapy water to
remove their protective
oil. Even so, when you first switch on
the oven or grill you may notice a smell
and some smoke.
Introduction
devel-
necessary
covering of
2
This appliance is designed to fit into a
standard 600mm wide housing unit with a
minimum internal height of 580mm.
Electrical connection
Please refer to installation instructions
for electrical connection.
In your own interest, and that of safety,
make sure that the installation is carried
out by a competent person.
Disconnection of electric appliances
should always be carried out by a com-
petent person.
Warning: This appliance must be
earthed.
Condensation
When hot and cold air meet, condensa-
tion forms. The outer door is air cooled
and the inner door gets hot, so some con-
densation might form; this is normal and
will disappear within 10 - 15 minutes.
Air Circulation
Please
refer
to
Instructions.
For the safe and continued operation of the
induction heating element, it is important to
ensure that there is enough space for air to
circulate around the underside of the prod-
uct, and that the integrated cooling fan is not
blocked. This is acheived by using runners
or ensuring that there is at least a minimum
gap of 20mm between the underside of the
oven and the next surface.
the
Installation
Advertisement
Table of Contents
