User's Section; Introduction - Belling D854 Installation And User Instructions Manual

TECHNICAL DATA
Data badge
On the bottom of the front frame behind
the oven door.
Type of gas
This cooker must only be used with Natural
Gas only, as specified on the appliance
data badge.
Gas category
Natural Gas - I
2H
Pressure setting
G20 Natural Gas @ 20 mbar
Pressure test point
Use the oven injector
Aeration - Fixed
Fuel Burner / Element Nominal
Rate Qn
Natural Hob - LHF 1.0kW
Gas Hob - LHR & RHR 2.0kW
Hob - RHF 3.0kW
Total heat input 8.0kW
Electric Oven 2300W
Single grill 1655W
Dual grill 2575W
Stir fan 30W
Cooling fan 10W
Oven light 25W
Maximum load 4940W
Electrical supply
220 - 240V ~ 50Hz
Spark generator: Mains operated 6 outlet
controlled by a single rocker switch at the
LHS of the facia to individual electrodes. 2
outlets shorted to earth.
Warning: This cooker must be earthed.
Hob - Burners have burner heads and
caps which are removable for cleaning.
Concealed electrodes to each burner.
Countries of destination
GB - Great Britain, IE - Ireland
Injector
Size
77
104
130
-
-
-
-
-
-
33

INTRODUCTION

Thank you for choosing a British
built appliance by Belling.
We hope that the following information
will help you to familiarise yourself
with the features of the appliance, and
to use it successfully and safely.
Our policy is one of constant development
& improvement. Strict accuracy of
illustrations and specifications is not
guaranteed. Modification to design
and materials may be necessary
subsequent to publication.
This appliance must be installed in
accordance with the regulations in
force, and only in a well ventilated
space. Read the instructions before
installing or using this appliance.
Your new appliance is designed to be
installed flush to base units.
Your 1st Year Guarantee
To fulfil the conditions of your guarantee,
this appliance must be correctly
installed and operated, in accordance
with these instructions, and only be
used for normal domestic purposes.
Please note that the guarantee, and
Service availability, only apply to the
UK and Republic of Ireland.
Before using the appliance for
the first time, remove any protective
polythene film and wash the oven
shelves in hot soapy water, to remove
their protective coating of oil. Even so,
when you first turn on the oven or grill
you may notice a smell and some smoke.
Gas & Electrical connection
Please refer to installation instructions
for the Gas & Electrical Safety Regulations
and the Ventilation Requirements.
In your own interest, and that of safety,
it is the law that all gas appliances be
installed by competent persons, who will
ensure that the installation is in accordance
with "The Gas Safety (Installation & Use)
Regulations 1994", & the "The Gas Safety
(Installation & Use) (Amendment)
Regulations 1996". Failure to comply
with these Regulations is a criminal offence.
Corgi registered installers undertake to
work to satisfactory standards.
Disconnection of gas and electric
appliances should always be carried
out by competent persons.
Warning: This appliance must be
earthed.
To replace an oven light bulb
Caution: Switch off the electricity
supply to the cooker at the socket, to
avoid the risk of electric shock.
Wait until the oven is cool, then
remove the shelves.
The oven light is at the rear of the oven
cavity.
Remove the loose oven back - unscrew
the 4 securing screws (one at each cor-
ner).
Please note that the oven light bulb is not
covered by the guarantee. Replacement
bulbs can be ordered from your local
supplier, or bought from a hardware store.
2