Electromagnetic Compatibility - National Instruments Fieldbus User Manual

Appendix C Specifications
Safety
For UL and other safety certifications, refer to the product label or to
Note

Electromagnetic Compatibility

For EMC compliance, operate this device with shielded cabling.
Note
CE Compliance
Note Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, click Declarations
of Conformity Information at
FBUS-HSE/H1 LD User Manual
This product is designed to meet the requirements of the following
standards for safety and electrical equipment for measurement, control, and
laboratory use:
• IEC 60950, EN 60950
• UL 1950, UL 60950
• CAN/CSA C22.2 No. 60950
Emissions................................................EN 55011 Class A at 10 m
Immunity ................................................EN 61326-1:1997/ +A2:2001,
CE, C-Tick and FCC Part 15 (Class A) Compliant
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
ni.com/hardref.nsf/
FCC Part 15A above 1 GHz
Table 1
.
C-2
.
ni.com
ni.com