Function Interface - National Instruments AutoCode NI MATRIX Reference

Function Interface

© National Instruments Corporation
sa_fx_externs.c
The function interface files are:
sa_types.h
sa_fxp.h
sa_fxr.h
sa_fxm.h
sa_fxmp.h
sa_fx_temps.h
sa_fxprv.h
sa_fxscale.h
sa_fxlimit.h
sa_fx_f.h
sa_fxp_f.h
sa_fxm_f.h
sa_fxmp_f.h
sa_fxadd_byte.c
sa_fxadd_short.c
sa_fxadd_long.c
Contains definitions for extern variables such as
mask buffers that are read only.
Updated to include fixed-point types.
Contains fixed-point conversion macros with
overflow protection.
Contains fixed-point relational macros.
Contains fixed-point arithmetic macros.
Contains fixed-point arithmetic macros with
overflow protection. For 32-bit division and
multiplication, overflow sometimes cannot be
detected.
Contains the declaration information for
temporary variables used in fixed-point
computations.
Contains macros used only by the other macros.
Contains scale factor constants for different radix
values.
Contains maximum and minimum values that can
be represented in different fixed-point types.
Contains prototypes for fixed-point conversion
functions without overflow protection.
Contains prototypes for fixed-point conversion
functions with overflow protection.
Contains prototypes for fixed-point algebraic
functions without overflow protection.
Contains prototypes for fixed-point algebraic
functions with overflow protection
Contains fixed-point addition functions for byte
data type.
Contains fixed-point addition functions for short
data type.
Contains fixed-point addition functions for long
data type.
2-33
Chapter 2 C Language Reference
AutoCode Reference