Vectorization Features - National Instruments AutoCode NI MATRIX Reference

Chapter 6 Vectorized Code Generation
k = k + 1;
}
}
k = 1;
for (i=1; i<=5; i++) {
Y->delayed_pulse[-1+i] = X->sensor_delay[-1+k];
k = k + 1;
}
/* ----------------------------
/* {VecEx..2} */
Throttle = -8.7*U->sensor_5;
Pedal = -7.6*U->sensor_11;
Brake = -6.5*U->sensor_12;
Gear = -5.4*U->sensor_4;
Clutch = -4.3*U->sensor_1;
/***** State Update. *****/
/* ----------------------------
/* {VecEx..12} */
k = 0;
XD->sensor_delay[k] = Throttle;
k = k + 1;
XD->sensor_delay[k] = Pedal;
k = k + 1;
XD->sensor_delay[k] = Brake;
k = k + 1;
XD->sensor_delay[k] = Gear;
k = k + 1;
XD->sensor_delay[k] = Clutch;
k = k + 1;
/***** Swap state pointers. *****/
XTMP = X;
X = XD;
XD = XTMP;
INIT = 0;

Vectorization Features

AutoCode Reference
This section describes features of the vectorized code. You do not have to
enable these features explicitly. These features are the natural result of
introducing arrays into the generated code. In other words, to support
vectorization for any model, these features must be present.
Gain Block */
Time Delay */
6-14 ni.com