National Instruments AutoCode NI MATRIX Reference page 34

simulation (automatic compiling and linking of usr_dsp.c into new UCB shared library)
usr_dsp.c (Handwritten UCB using sa_user.c example)
© National Instruments Corporation
Figure 2-3. Linking Handwritten UCBs with the SystemBuild Simulator
The arguments to a UCB written only for linking with the SystemBuild
simulator (using
usr01.c
to a UCB written for linking with an AutoCode application (using
). This difference stems from several sources. For example,
sa_user.c
UCBs written for linking with an AutoCode application might not take
advantage of some features supported in the SystemBuild simulator, such
as linearization. Linearization is not supported in AutoCode generated
code. Also, highly optimized implementation of a UCB tends to be more
of an issue when linking it with AutoCode generated code. If you have
handwritten code for simulation with SystemBuild using the UCB format
in and plan to use the same algorithm with AutoCode-generated
usr01.c
Fleming: usr_dsp.c
Function Name: usr_dsp
) are inherently different than the arguments
2-17
Chapter 2 C Language Reference
simexe.lnx
AutoCode Reference