ZeeVee ZyPer4K Configuration Manual page 7

Installing ZyPer4K Management Software
ZyPer4K management software is available from ZeeVee technical support.
 If presented with a Windows security dialog
box, ensure that both private and public
networks are checked and click Allow.
 The telnet dialog box will then appear.
Click OK and the management software
opens.
This software refreshes every 5 seconds.
Note: The PC running the software has to be connected to the same network as the Encoders/Decoders.
Typically, you could use any available Ethernet port in your network switch, but you could also use any
available Utility Ethernet port on any connected Encoder/Decoder.
ZyP er4 K C onf i gu rat io n G ui de
|
Pag e 7