Edge Grinder Kit (Accessory For Htc Gl 270) - HTC GL 270 User Manual

HTC GL
270/400/450/550
Figure 4-5. Making operation easier
Tip!
By arranging the hose and cable as shown in the picture, you avoid disruptive
stoppages caused by having to re-position the cable and hose.
4.9

Edge grinder kit (accessory for HTC GL 270)

By attaching the edge grinder kit accessory to the HTC GL 270, there is the option to
use the machine as an edge grinding machine. The attachment is done in a few easy
steps, and with just a few parts, but it provides increased flexibility in the use of the
machine. The edge grinder kit makes it possible to grind edges and corners effectively
from different directions.
Follow the instructions under Change to Edge Grinder Cover, Attachment of Edge
Grinder Adapter, and Positions for Edge Grinder Adapter when attaching the edge
grinder kit.
4.9.1 Change to Edge Grinder Cover
Perform the change in the order below. The numbers in
correspond to the numbers in the procedure below:
1. Loosen the lower screw and remove the tool holder.
2. Remove the four motor bolts.
1.0
Figure 4-6, page 22
Usage
21