Fitting Grinding Tools - HTC GL 270 User Manual

Usage
4.4.1

Fitting grinding tools

1. Slide the grinding tool diagonally from above down into the appropriate guide
slot on the tool holder. Then push the tool fully into the guide slot,
4-2, page
Figure 4-2. Fitting grinding tools
2. Lock the grinding tool into the tool holder by giving it a few light taps with a
rubber hammer - see
Figure 4-3. Locking grinding tools
16
16.
Figure 4-3, page 16.
HTC GL
270/400/450/550
see Figure
1.0