Zipper Sewing - JUKI HZL-L series Instruction Manual

① ② ③
00 01 02 03 04 05 06 07 08 09
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
①
②
30 31 32 33 34 35 36 37 38 39 40 41 42 43
⑤
F F F F
F
44 45 46 47 48 49
③
F F F F F
①
58 59 60 61 62 63 64 65 66 67 68 69 70 71
F F F F F
⑤
72 73 74 75 76 77 78 79
F F F F F
86 87 88 89 90 91 92 93 94 95 96 97 98 99
F F F F F
(A) (B)
F F A F
50 51 52 53 54 55 56 57
④
F F F F
②
⑨
F F F F
⑧
70 81 82 83 84 85
⑦
F F F F
⑥
F F F F

Zipper Sewing

① Stitch pattern:
② Thread tension dial: 1 to 4
③ Presser foot:
Attaching the zipper foot
Fit the pin on zipper foot E to the groove on the foot
holder.
① Groove
② Pin
(A): To sew the left side of the zipper, attach the zipper
foot with the pin on the right-hand side.
(B): To sew the right side of the zipper, attach the zipper
foot with the pin on the left-hand side.
Fabric preparation
Add 3/8˝ (1 cm) to the zipper length. This is the overall
opening size.
① Right side of the fabric
② 3/8˝ (1 cm)
F F F A F
③ Opening size
④ Zipper length
⑤ End of the zipper opening
F F F F F
Place the right sides of the fabric together.
Attach the zigzag foot and seam up to the end of the
zipper opening, with a 3/4˝ (2 cm) seam allowance.
F F F F F
Reverse the stitch to fasten the seam.
Manually increase the stitch length to 5.0 and baste the
zipper opening with the thread tension loosened to 1-3.
⑤ End of the zipper opening
⑥ 3/4˝ (2 cm)
⑦ Basting
⑧ Reverse stitches
F F F F F
⑨ Seam stitches
F F F F F
35
00
Zigzag foot A
Zipper foot E