Fringing; Drawn Work - JUKI HZL-L series Instruction Manual

F F F A F
②
①
4
F F F F F
1
F F F F F
70 81 82 83 84 85
2
F F F F F
3
F F F F F
F F F A F
②
①
4
F F F F F
1
F F F F F
2
70 81 82 83 84 85
F F F F F
3
F F F F F
③
F F
F F
F F
F F
③
F F
F F
F F
F F

Fringing

① Stitch pattern:
② Thread tension dial: 1 to 4
③ Presser foot:
Fringing adds a special touch on table linens and shawls.
Choose a firm, woven fabric like linen where threads can
be removed easily.
1 Carefully cut the fabric on the grain. Remove a single
strand of yarn or thread where the fringing is to begin.
2 Sew down the left side so the right hand stitches fall
in the open space.
3 Remove all excess yarn located to the right of the
stitching and create a fringe.

Drawn Work

① Stitch pattern:
② Thread tension dial: 1 to 4
③ Presser foot:
Drawn work uses the same method as fringing. Choose
a firm, woven fabric like linen where threads can be
removed easily.
1 Carefully cut the fabric on the grain. Determine the
width of the drawn work and remove one strand of
yarn or fabric thread at each end.
2 Sew down the left side, guiding the fabric so the right
hand stitches fall in open space. After finishing the left
side, turn the fabric around 180°. Sew down the other
side.
3 Remove the yarn or fabric threads between the
stitching.
42
52 - 54 (100-stitch model)
18 (20-stitch model)
Satin stitch foot F
52 - 54 (100-stitch model)
18 (20-stitch model)
Satin stitch foot F