JUKI HZL-L series Instruction Manual page 14

1
①
2
3
4
③
5
②
④
Inserting the bobbin
CAUTION:
Turn OFF the power switch before inserting the bobbin
and threading the bobbin holder.
1 Place a bobbin in the bobbin holder with the thread
running off counterclockwise.
① End of thread
Guide the thread into the first notch ② on the front
2
side of the bobbin holder.
② Notch
3 Draw the thread to the left, sliding it between the
tension spring blades.
4 Continue to draw the thread lightly until the thread
slips into the second notch ③ . Pull out about 6˝ (15
cm) of thread.
③ Notch
5 Attach the hook cover plate. Check the threading by
referring to the diagram ④ shown on the hook cover
plate.
④ Threading diagram
12