JUKI HZL-L series Instruction Manual page 9

④
⑦
④ Needle up/down button
Press the needle up/down button to bring the needle
up or down. The machine will stop with the needle up or
down depending on the needle position determined by
this button.
⑤ Cursor buttons
⑤
Use these buttons to move the cursor ⑦ .
Press
Press
⑥ Value set buttons
Use these buttons to change the set value.
⑥
Move the cursor under the digit you would like to change.
Press
Press
7
button to move the cursor to right.
button to move the cursor to left.
button to increase the value.
button to decrease the value.