Table of Contents
Advertisement
USB Retainer Slot
The management panel has a USB retainer slot which is shown in Figure
14. You can use the USB retainer kit and the USB retainer slot to prevent
the USB device from falling out of the USB port.
Note
Cable ties are designed to be used only once. Before you tighten
them make sure they are positioned where you want them.
1000 LINK
FDX
ACT
HDX
100 LINK
COL
ACT
CONSOLE
RESET
The following steps describe how to use the USB retainer kit and the USB
retainer slot.
1. To fit the shape of the USB device, cut the USB retainer to an
appropriate size and stick the double-side adhesive tape onto the back
of the USB retainer as shown in Figure 15.
FAULT
DC 12-24V
PWR
FNC1
FNC2
READY
FAULT
Figure 14. USB retainer slot
Installation Guide for AT-AR2010V Router
USB Retainer Slot
31
Advertisement
Table of Contents
