Figure 21: Attaching The Rubber Feet - Allied Telesis AT-AR2010V Installation Manual

Fitting Rubber Feet
If your routers do not already have rubber feet fitted, fit these as follows:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Turn the router over and place it on a table.
3. Remove the adhesive rubber feet from the packaging and press them
firmly onto the base of the router, as shown in Figure 21.
Figure 21. Attaching the rubber feet
4. Turn the router over again and place it on a flat, secure surface (such
as a desk or table) leaving ample space around the unit for ventilation.
Installation Guide for AT-AR2010V Router
45