Table of Contents
Advertisement
Chapter 1: Overview
Power Supply
36
A single 4-pin latching type connector is available on the back panel for
power supply. The connector accepts 12V DC power supply. The
connector is not accessible when DIN rail mounting kit is used. The rear
power socket is only used when the router is sitting horizontally on a desk
or table. You can use the power cable and AC power Adapter which are
supplied with the router to power the router from AC mains.
The router also has a DC power inlet on the front panel. A single 3-pin
power connector is available for DC power input. The front panel power
socket is used when the router is mounted in a DIN rail, or powered from a
building with a centralized 12-24V DC feed.
Refer to "Technical Specifications" on page 59 for the input voltage range.
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord. E3
Advertisement
Table of Contents
