Chapter 2 Troubleshooting Procedures
Procedure 4
Connector Check and Replacement Check
HDD(s) is/are connected to the connector(s) on the system board. The connection of HDD(s)
and board may be defec
following instructions in Chapter 4, Replacement Procedures and perform the following
checks.
Check 1
Make sure HDD(s) is/are firm
board.
If an
y of
the connections are loose,
prob
lem
still occurs, go to Check
Check 2
(One of) HDD(s) may be faulty. Replace it with a new one following the
instr
ucti
ons in Chapter 4, Repl
prob
lem
still occurs, perform Check
Check 3
Syst
em b
oard may be faulty. Replac
in Chapter 4, Replacement Proced
Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
tive. Otherwise, they may be faulty. Disassemble the computer
ly connected to the connector(s) on the system
2.
acement Procedures an
reconnect firm
ly and repeat Procedure 1. If the
d check the operation. If the
3.
e it with a n
ew one following the instructions
ures.
17