Chapter 4 Replacement Procedures
4.14 LCD unit
Removing the LCD unit
The following describes the procedure for removing the LCD unit (See Figure 4-14-1 to 4-
14-4).
1. Remove Screw MYLAR cover x4
2. Remove the following screws securing the display mask
3. Insert your finger between the edge of the display mask and the LCD, and remove the
display mask while releasing the latches of display mask. (Note: when removing the
display mask, please first remove from top side to the bottom in order to lessen the
degree of breaking.
4. Remove the following screws securing the LCD unit, and disconnect CCD FPC
M2.03.0F
Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
M2.04.0F
FLAT BIND screw
Figure 4-14-1 Remove the display mask
FLAT BIND screw
x4
x4
47