Hard Disk Drive Troubleshooting; Procedure 1 Partition Check; Procedure 1 - Toshiba Satellite T110 Maintenance Manual

Chapter 2 Troubleshooting Procedures
2.5 SATA Hard Disk Drive Troubleshooting
To check if HDD is malfunctioning or not, follow the troubleshooting procedures below as
instructed.
Procedur e 1: Partition Check
Procedure
Procedur e
Procedure 4:
Procedure 5: Conn
CAUTION: The contents
procedures are executed. Transfer the contents of the hard disk to other
storage drive(s). For the backup, refer to the User's Manual.

Procedure 1

Partition Check
Insert the Toshiba USB memory and start th
Check 1 Input C: and press Enter. If you cannot change to drive C, go to Check 2. If y
can change to drive C, go to Procedure 2.
C heck 2 input USB memories and press Enter. Choose Display Partition Information from
the menu. If drive C is listed in the Display Partition Information, go to Check 3.
If drive C is not listed, return to the menu and choose the option to create a DOS
partition or a logical DOS drive on drive C. If the problem still occurs, go to
Procedure 2.
C heck 3 If drive C is listed as active in the menu, go to Check 4. If drive C is not listed as
active, return to the menu and choose the option to set the active partition for
drive C. Then go to Procedure 2.
C heck 4 Remove the USB memory and reboot the computer. If the problem still occurs, go
to Procedure 2. Otherwise, the 2.5" HDD is operating normally.
Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
2: Message Check
3: Format Check
Diagnostic Test Program Execution Check
ector Check and Replacement Check
of the hard disk will be erased when the HDD troubleshooting
e computer. Perform the following checks:
ou
14