Chapter 4 Replacement Procedures
Installing the top cover assembly
The following describes the procedure for installing the cover assembly.
1. Connect the Power FFC to the connector on the power board.
2. Secure the power board with the following screws.
3. Install the top cover assembly to the base assembly.
NOTE: Be careful not to catch the cables between cover assembly and base assembly.
4. Connect the touch pad FFC /LAN FFC/ Power FFC to the connector on the system
board.
5. Install the Keyboard and Keyboard holder.
6. Secure the cover assembly with the following screws from the back and bottom of
computer.
M2.02F
M2.03F
M2.04F
M2.06F
M2.58F
Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
M2.03F
FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
x2
x3
x2
x9
x3
x2
34