Toshiba Satellite T110 Maintenance Manual page 187

Chapter 4 Replacement Procedures
Figure 4-11-2 Remove the screws from I/O boards
Installing I/O Boards
The following describes for removing I/O boards.
1. Connect the CRT cable, HDMI FFC, Audio FFC, LAN FFC, Speaker cable from I/O
boards' connectors.
2. Fix the below screws then incline insert in I/O Boards(CRT board, HDMI board, Audio
board and LAN board)
NOTE: Be careful not to catch the cables between cover assembly and base assembly.
Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
 M2.0x3F
FLAT BIND screw
 M2.0x4F
FLAT BIND screw
x6
x1
39