Procedure 3 Diagnostic Test Program Execution Check - Toshiba Satellite T110 Maintenance Manual

Chapter 2 Troubleshooting Procedures
Procedure 3 Diagnostic Test Program Execution Check
The HDD test program is stored in the Diagnostics Disk. Perform all of the HDD tests in the
Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about
the HDD test program.
If an error is detected during the HDD test, an error code and status will be displayed. The
error codes and statuses are described in Table 2-5-1. If an error code is not displayed but the
problem still occurs, go to Procedure 5.
Code
01
02
04
05
07
09
0A
0B
10
11
20
40
80
AA
BB
CC
E0
F0
??
Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
Bad Command
Bad Address Mark Er
Record Not Found
HDC Not Reset Error
Drive Not Initialized
DMA Boundary Error
Bad Sector
Bad Track Error
ECC Error
ECC Recover Enabled
HDC Error
Seek Error
Time Out Error
Drive Not Ready
Undefined Error
Write Fault
Status Error
No Sense Error
Other Error
Table 2-5-1 HDD error code & status
Statu s
Error
ror
16