Email Alerts - SMART Board M600i6 Configuration And User's Manual

A P P E N D I X A
Remotely managing your system through a network interface
Submenu setting
Gateway
DNS
Group Name
Projector Name
Location
Contact
SNMP
Read-Only Community
Read/Write Community
TRAP Destination Address Displays or allows you to set the IP address of the network's

Email alerts

This menu enables you to enter your preferred address for receiving email alerts and to adjust
related settings.
Submenu setting
Email Alert
To
46
Description
Displays or allows you to set the projector's default network
gateway in values between 0.0.0.0 and 255.255.255.255.
Displays or allows you to set the projector's IP address for your
network's primary domain name server in values between 0.0.0.0
and 255.255.255.255.
Displays or allows you to set the projector's workgroup name
(maximum 12 characters).
Displays or allows you to set the projector's name (maximum 12
characters).
Displays or allows you to set the projector's location (maximum 16
characters).
Displays or allows you to set the contact name or number for
projector support (maximum 16 characters).
Turns the Simple Network Management Protocol (SNMP) agent
on or off.
Sets a password that is required for each SNMP get request to
the device.
N O T E
The default for Read-Only Community is public.
Sets a password that is required for each SNMP set request to the
device.
N O T E
The default for Read/Write Community is private.
SNMP TRAP manager in values between 0.0.0.0 and
255.255.255.255. The TRAP destination address is the IP address
of the computer assigned to handle unsolicited data generated by
SNMP TRAP events generated by the projector, such as power
state changes, projector failure modes, a lamp needing to be
replaced or other issues.
Description
Select Enable to turn on or Disable to turn off the email alert
function.
Displays or allows you to set the email address of the email alert
recipient.