Chapter 2 - Installation - Revo R4-8-16DVR2 User Manual

Netcon (Remote Administration System)
Chapter 2 — Installation
CAUTION: If an older version of Netcon software is installed in your computer, you should uninstall
the older version first.
NOTE: In the Start menu in Windows, go to Control Panel. Double click the Power Options to evoke the Management
Properties dialog box. Under the Power Schemes tab, set both Turn off monitor and Turn off hard disks to Never.
1. Insert the installation CD.
2. Run the Setup.exe file.
NOTE: The User Account Control window might appear when using the Microsoft Windows Vista operating system.
Click Allow and install Netcon software following the instructions.
3. The .NET Framework and the Visual C++ Runtime Libraries are installed automatically.
NOTE: Installing the .NET Framework and the Visual C++ Runtime Libraries is required for Netcon to operate
properly. This installation step will be skipped if they are already installed on your computer.
4. Designate the folder path to install Netcon and select the user(s) who can use Netcon. Then click Next.
5. When the following dialog box appears, click Next.
3